Top 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Top 10 usual forklift crashes ， forklift procedure must take notice of these issues ！.

Blog Article

Don't ignore the forklift at the office. If the operation is bad, there will be major mishaps in mins, and there are lots of crashes entailing forklifts.

Instance 1: The forklift freight obstructed the vehicle driver's view, and the individual ahead can not be discovered, leading to a moving mishap.
Situation 2: In order to preserve the balance of the forklift when lifting heavy items, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Situation 3: The width of the forklift cargo goes beyond the allowed size of the path and hangs on the roadside shelf, which virtually creates an mishap.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the employees illegally, the forklift driver does not put on the safety belt, the forklift lifter falls and the driver is squashed when the forklift rolls over.
Case 7: The forklift vehicle driver did not use a seat belt and dropped from the automobile when it rolled over and was squashed.
Forklift operation should pay attention to these issues ：.

Start.
1. Prior to starting, observe the environments, and after verifying that there are no obstacles that prevent the security of driving, beep the horn first and then begin.
2. For vehicles with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) gauge have to be risk-free prior to starting.
3. When the forklift begins with a load, the vehicle driver needs to initially validate that the lots is steady and reliable.
4. The beginning must be slow-moving and steady.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast must be tilted backwards. .
2. Do not raise the fork too high when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles overhead. When the lots is traveling, the fork needs to not be elevated too high, which will influence the stability of the forklift. .
3. After unloading, the fork must be decreased to the normal driving setting prior to driving. .
4. When transforming, if there are pedestrians or vehicles nearby, the driving signal must be released first. High-speed sharp turns are forbidden. High-speed doglegs will certainly create the vehicle to lose lateral security and tip over. .
5. When the forklift is downhill, it is purely restricted to switch off the flame and slide, and it is forbidden to brake all of a sudden while driving with tons unless there are unique circumstances.
6. When the forklift is running, it needs to follow the traffic rules in the manufacturing facility and have to maintain a particular safety range from the car ahead. .
7. When the forklift is running, the load must remain in the lowest placement that does not prevent the driving, and the gantry needs to be appropriately tilted back. The tons will not be increased other than when piling or filling. .
8. The height of the tons should not obstruct the chauffeur's view. In special scenarios, when the thing impacts the forward vision, drive at a reduced speed when reversing.
9. It is forbidden to activate the ramp, nor to drive throughout the ramp. .
10. The risk-free driving rate of the forklift in the factory area is 5 km/h, and it must drive securely at a low rate when getting in the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is forbidden for workers to stand on the fork to hold things and play a balancing role. .
12. If problems are located, they will certainly be fixed and reported in a timely way, and they will never run with health problems or hide them.

loading and dumping.
1. When fork-loading products, the distance in between the two forks need to be changed as needed to make the lots of both forks balanced and not manipulated, and one side of the product ought to be against the rack. .
2. It is forbidden to work with a single fork or utilize a fork top or pull. In unique situations, safety indication should be established to remind surrounding pedestrians. .
3. In the process of filling and dumping items, the forklift must be stopped with the brake. .
4. The speed of the lorry ought to be slow-moving and consistent. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and hurt individuals. .
5. When utilizing a fork to fork the goods, the fork needs to be as deep as possible under the lots, and it should be kept in mind that the fork tip must not touch various other goods or items. The tons needs to be maintained with marginal back tilt of the gantry so that the tons does not move in reverse. The pole can be tilted ahead a little when the tons is reduced to allow for easy positioning of the load and removal of the forks. .
6. It is prohibited to fork products at high speed and collide with difficult items with the fork head. .
7. When the forklift is functioning, it is prohibited for individuals to stand around the fork, so as to avoid the collapse of the goods and hurt people. .
8. Overwhelming is prohibited, and it is restricted to use forks to lift workers to engage in high-altitude operations to prevent high-altitude falling mishaps. .
9. It is not permitted to make use of the brake inertia to slip, put, round or roll objects. .
10. It is not allowed to utilize forks to choose, turn pallet unload.

Leaving .
1. It is prohibited to leave the forklift when the products on the fork are in the air. Prior to leaving the forklift, you have to unload the goods or reduced the fork structure.
2. Draw the hand brake handle to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the driver does not leave the lorry's line of vision and does not Stand-on Electric Pallet Stacker surpass 1 min).
4. Get rid of the trick. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and gas, lubricating oil and cooling water need to be added.
2. Inspect the safety performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are full and efficient.
4. Throughout the procedure of the forklift, examine whether the stress and temperature level are normal.
5. After the forklift is running, the outside leakage must also be inspected and the seals ought to be changed in time.

Forklift Safety Operation Specifications.
1. You must check before leaving the cars and truck;.
2. When you come across somebody before you throughout driving, you ought to send a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to prevent the propensity of " totally free switching";.
6. Running up and down the slope ought to be sluggish and consistent, and no switching on the incline is enabled.
7. Do not drive Electric Forklift Truck for Warehouse across the slope. When the gradient is greater than 10%, the vehicle must be driven backwards when worsening;.
8. When the forklift personnel bring the goods and progress, if they encounter large or heavy items and most likely to the driver's line of vision, they need to take the reversing exercise
.
The "Eight Prohibitions" must be followed in the operation.
1. Solitary fork operation is not enabled.
2. It is not allowed to lift the goods for long distance driving.
3. It is not allowed to pick up the goods by turning over the pallet with the fork.
4. It is not permitted to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not enabled to utilize inertia force to pick up the goods.
6. It is not allowed to use braking pressure to expatriation round or easy-to-roll objects.
7. It is not allowed to bring people to deal with the pallet or fork, and it is purely prohibited to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Car parking is not allowed under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Areas with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact same size as the barrier need to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844